Guix

See also: HPC and HTC tutorial | Run MPI On Grid'5000 | GPUs on Grid5000 | GNU Parallel | Modules | Conda | Guix | Singularity | Deep Learning Frameworks

	Note
	This page is actively maintained by the Grid'5000 team. If you encounter problems, please report them (see the Support page). Additionally, as it is a wiki page, you are free to make minor corrections yourself if needed. If you would like to suggest a more fundamental change, please contact the Grid'5000 team.

The Guix package manager is available on Grid'5000 to provide an alternative way of installing software on nodes.

This page describes the use of Guix on Grid'5000. For additional information about Guix, see:

• The Guix website
• The Guix Reference Card
• The Guix manual, package management section
• The Guix HPC blog, with information about Guix usage in a HPC and reproducible context

Note: For now, Guix is only available on Grid'5000 nodes with x86_64 architecture (not on POWER or ARM nodes).

Warning

Too use GUIX on Grid'5000, we strongly recommend not to use the guix install command, which can cause side effects since installed software will be directly available by default (in your $PATH), causing conflicts with system software and environment modules. We recommend using guix shell to set up isolated development environments (https://guix.gnu.org/manual/en/html_node/Invoking-guix-shell.html).

Quick start

Guix is available on frontends and nodes (using standard or deployed -nfs and -big environments) directly through the guix command.

guix shell (the recommended way)

You can find all you need here : https://guix.gnu.org/manual/en/html_node/Invoking-guix-shell.html

For exemple, to use openmpi, you can do :

fontend:

guix shell openmpi -- mpirun --version

It is also possible to create manifest with command below. For example with openmpi, automake and bash :

fontend:

guix shell --export-manifest openmpi automake bash > manifest.scm

And we can after use this manifest to load our environment :

fontend:

guix shell -m manifest.scm -- which mpirun automake

It's also possible to open a shell within this environment if desired :

fontend:

guix shell -m manifest.scm -- bash

guix install (not recommended)

guix install command is not recommended on Grid'5000 because it causes side effects since installed software will be directly available by default (in your $PATH), causing conflicts with system software and environment modules.

For example to install hello command :

fontend:

guix install hello

If it's the first time you're using GUIX, programs installed must be added to your PATH. You can do this by simply running :

fontend:

export GUIX_PROFILE=~/.guix-profile

fontend:

. "$GUIX_PROFILE/etc/profile"

You can also simply disconnect and reconnect.

You can then use what you just installed:

fontend:

hello

 > Hello, world!

To update available packages from Guix channels, use:

fontend:

guix pull

(be patient it will take a while the first time)

To list installed packages :

fontend:

guix package -I

To remove package installed with guix install commmand :

fontend:

guix remove hello

Advanced usage examples

Generating image to use with singularity

You can use Guix to create container image for singularity with guix pack. For instance, to build an image containing emacs and bash, use:

$:

guix pack -f squashfs bash emacs gcc

 ....
 /gnu/store/7pzhxrkjrfk3sh9i4dn2k61gvi1slr7g-squashfs-pack.gz.squashfs

The built image can be run using singularity. For instance, from a node:

node:

singularity run /gnu/store/7pzhxrkjrfk3sh9i4dn2k61gvi1slr7g-squashfs-pack.gz.squashfs

  WARNING: passwd file doesn't exist in container, not updating
  WARNING: group file doesn't exist in container, not updating
  /bin/sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
  No runscript found in container, executing /bin/sh
  sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)

 Singularity> gcc -v
 Using built-in specs.
 COLLECT_GCC=gcc
 COLLECT_LTO_WRAPPER=/gnu/store/xpdy9vvqym9xv7praqkwsm3gdzn2kv1p-gcc- 
 10.2.0/libexec/gcc/x86_64-unknown-linux-gnu/10.2.0/lto-wrapper
 Target: x86_64-unknown-linux-gnu
 Configured with:
 Thread model: posix
 Supported LTO compression algorithms: zlib
 gcc version 10.2.0 (GCC)

Note: If you forget the bash (or similar) package, singularity run and singularity exec will fail with an unhelpful “no such file or directory” message.

For more information of singularity usage under Grid'5000, see Singularity page.

Container

Guix shell command, with --container option, can be used to easily isolate the execution of your program. For instance, this will instanciate an isolated container containing coreutils, gcc and procps

node:

guix shell --container coreutils gcc procps

node~[env]:

gcc -v

 Using built-in specs.
 COLLECT_GCC=gcc
 COLLECT_LTO_WRAPPER=/gnu/store/j3zyz07nivflink7ix0cqasl1aa52vd8-gcc-12.2.0/libexec/gcc/x86_64-unknown-linux-gnu/12.2.0/lto-wrapper
 Target: x86_64-unknown-linux-gnu
 Configured with: 
 Thread model: posix
 Supported LTO compression algorithms: zlib
 gcc version 12.2.0 (GCC)

Configuration details

Here are some details of Guix deployment and configuration under Grid'5000 that may help in case of problem or for your customized deployment.

Guix profile

Note: To work properly, a .guix directory is created in your home directory (it's a Grid'5000-specific directory). If you remove it, Guix will stop working since your profile is stored there.

	Warning
	If you have a guix profile because you have used guix before you should move it somewhere else or it won't work with the guix we provide

Environment variables

In order to use Guix on Grid'5000, some environment variables are correctly set:

$:

env | grep GUIX

 GUIX_DAEMON_SOCKET=guix://guix.sophia.grid5000.fr
 GUIX_LOCPATH=/var/guix/profiles/per-user/root/guix-profile/lib/locale
 GUIX_PROFILE=/home/ddelabroye/.guix-profile

If those variables are not set you will have to manually source /etc/profile.d/guix.sh:

node:

. /etc/profile.d/guix.sh

Package installation steps

When you try to install or compile a package, the following steps happen:

• Guix first tries to fetch the compiled package from ci.guix.gnu.org
• If not found, it will try to find it on all Grid'5000 Guix servers. (Each Grid'5000 site hosts a Guix server communicating with each other. If you install a package on Nancy and then decide to install the same package in Grenoble, it will be fetched from Nancy).
• If it still not found, it will be compiled on a dedicated machine on Grid'5000, which is not accessible to the users