Grid5000:UsagePolicy
General principles
Grid'5000 is a scientific instrument supporting experiment-driven research in all areas of computer science, with a focus on distributed computing, cloud computing, high performance computing, big data and networking. Its use should lead to scientific results or contribute to education in this area. Other uses require a special permission from the executive committee. Unauthorized uses might result in prosecution. Access policy is detailed on that page.
This document defines rules to allow the shared use of this infrastructure by different communities of users, with different needs. If your intended usage does not fit within the detailed rules presented below, you can request a special permission from the executive committee. Exceptions are granted on a regular basis, as can be seen on the page listing those.
The Grid'5000 General Conditions of Use also specify the legal frame and the application of the law.
Acknowledging Grid'5000 usage
The sustainability of the Grid'5000 testbed is ensured through regular funding requests, for which information must be provided about usage and results obtained by experimenters. Grid'5000 users must contribute to this effort by providing information about their usage upon request and in a timely manner. Example of such requests include highlights, 1-2-pages usage reports (for the major consumers), short slides deck about an experiment, etc.
Additionally, Grid'5000 must be acknowledged in all publications presenting results or contents obtained or derived from the usage of Grid'5000. All those publications must be added to the Grid'5000 collection on the HAL Open Archive. This can be achieved by adding your publication to HAL (possibly without the full text), and specifying "GRID5000" in the collaboration field. The official acknowledgment to use in your publication is the following:
Experiments presented in this paper were carried out using the Grid'5000 testbed, supported by a scientific interest group hosted by Inria and including CNRS, RENATER and several Universities as well as other organizations (see https://www.grid5000.fr).
Resources reservation
Experiments performed on Grid'5000 typically require several resources reservations (or tasks, or jobs). Resources can be reserved using three different queues (default, production, besteffort), with different usage policies described below. Unless specified otherwise, jobs are submitted in the default queue. It is possible to reserve resources as soon as possible (submissions, typically for small-scale reservations) or using advance reservations (for larger-scale experiments, during nights and weekends).
Notes:
- On the technical level, resources reservations are handled by the OAR resource manager. When using the command line interface, the queue is selected using the
-qswitch (e.g.:oarsub -q besteffort -I). - The usage of the testbed is actively monitored by the Grid'5000 staff. In case of usage not following the rules, your account will be locked.
- The report abuse form can be used to report a Grid'5000 usage that does not meet the rules and is preventing you from accessing the resources you need for your work. You can also contact the Grid'5000 staff directly (support-staff@lists.grid5000.fr).
Rules for the default queue
|
Note |
|---|---|
In all this document, time is expressed in the Europe/Paris timezone. | |
Daytime is dedicated to smaller-scale experiments, and preparatory work for large-scale experiments. Large-scale jobs must be executed during nights or weekends (generally, using advance reservations). Specifically:
- Between 09:00 and 19:00 during working days (Monday to Friday, excluding public holidays in France), you should not use more than the equivalent of 2 hours on all the cores of the cluster during a given day (e.g. on a 64 bi-processor (quad core) cluster, you should not use more than (2 hours)*(2 CPU)*(4 cores)*(64 nodes)= 1024 core.hours).
- Your jobs must not cross the 09:00 and 19:00 boundaries during week days (to extend an overnight reservation, for example). (This also means that you must not have jobs that last more than 14 hours outside weekends.)
- Restrictions applies to the number of allowed reservations in advance and how long in advance they can be made (this is enforced by the resources reservation system).
For more details, see the privilege levels table.
As special exceptions, to allow additional usage of free resources during the day:
- Jobs of duration shorter or equal to one hour, whose submission is done less than 10 minutes before the job starts, are excluded from daily quotas.
- This means that one can always reserve resources for up to one hour when they are immediately available.
- Similarly, job extensions requested less than 10 minutes before the end of the job, and for a duration of one hour or less, are also excluded from daily quotas. Those extensions can be renewed several times (always during the last 10 minutes of the job).
- This means that, when resources are still available, one can always extend jobs for up to one hour.
- Crossing the 19:00 boundary is allowed for jobs submitted at or after 17:00 the same day. The portion of those jobs from 17:00 to 19:00 is excluded from daily quotas. This exception also applies to job extensions.
- This means that if at 17:00 or later on a given day, resources are not reserved for the following night, then it is possible to reserve them and start the night job earlier or extend an existing job for the whole night.
- Crossing the 9:00 boundary is allowed for jobs submitted on the same day. But the portion of those jobs after 9:00 is still included in the daily quota.
- This means that when resources are free in the morning, people are free to start working earlier.
Rules for the production queue
The production queue provides access to a different and smaller set of resources (only located in the Nancy site for time being), with a policy that is more suited to long-running, non-interactive jobs. See this page for more information.
Access to the production queue is restricted depending on the privilege level of the user group you are a member of.
To reserve resources in the production queue, see Getting_Started#Selecting_specific_resources.
For more details, see the privilege levels table.
Rules for the besteffort queue
The besteffort queue provides a way to submit low-priority, interruptible jobs. Access to the besteffort queue is not restricted at this point. If you are planning to use the besteffort queue for large-scale experiments, you should contact the Grid'5000 staff beforehand.
Rules for disks reservations
Hard disk drives on nodes can be reserved in order to store datasets between nodes reservations (and avoid moving data to nodes at the beginning of each nodes reservations). See Disk reservation for more information. The maximum duration for a disk reservation is 14 days. Reservations in advance are allowed.
Privilege levels table
|
Level |
Members |
Production queue access |
Advance reservations per site |
Max delay before reservations |
Best-effort queue access |
Notes |
|---|---|---|---|---|---|---|
|
Gold |
|
yes, full |
2 |
no limit |
yes |
|
|
Silver |
|
yes, but walltime limited to 24h |
2 |
48h |
yes |
"max delay before reservation" is unlimited for managers of groups of the tutorials site to allow teachers to reserve in advance for tutorial or teaching labs. See Tutorial or Teaching Labs HowTo for details. |
|
Bronze |
|
no |
1 |
24h |
no |
Notes:
- A gold or silver or bronze level is associated to every Grid'5000 user group that grants access to the platform. Thus, every Grid'5000 user, which has an effective access to the platform, is a member of at least one of such a group and makes resource reservations attached to such a group. Therefor, resources reservations of every user are constrained by the privilege level of the user group attached to them, as described in the table above.
- A document in French explains the privilege level policy in more details.
Special cases
Special permissions
As a reminder, if your intended usage does not fit within the detailed rules presented above, you can request a special permission from the executive committee. Exceptions are granted on a regular basis, as can be seen on the page listing those.
Usage of the Internet access
Usage of the Internet from Grid'5000 is actively monitored and logged both by the Grid'5000 staff, and by Grid'5000 upstream network provider RENATER. While Internet access is mostly unfiltered, users should contact the Grid'5000 staff if their usage is likely to raise alerts (for example, experiments involving network traffic that could be considered as unauthorized usage of RENATER).
Crypto-currency mining and other usages generating revenue
In the case of experiments involving crypto-currency mining or other actions that might generate revenue as a side effect, experimenters must ask the Grid'5000 staff (support-staff@lists.grid5000.fr) for credentials to use so that potential revenue is directed to an account controlled by the Grid'5000 organization. The use of Grid'5000 resources must not generate direct revenue to the user.
Changing the BIOS or BMC setting or flashing firmware is not allowed
Changing the BIOS or Board Management Cards (BMC) / IPMI settings of Grid'5000 nodes is not allowed. Neither is flashing any firmware (BIOS, network card, storage device, etc) of nodes. Please contact the technical team if your experiment would require it.
Mailing lists
As a Grid'5000 user you are automatically subscribed to the Grid'5000 users' mailing lists. The traffic is not very high, so please keep an eye on those emails as they may contain important information (see Mailing lists for more information). More than 800 users are subscribed to those lists, so please be careful before asking questions on the lists.
Tools which can help you respect the Policy
The usagepolicycheck tool is available on all frontends. It allows to check whether your usage of the platform respect the policy or not. It can be useful to launch it after you've submitted your jobs to make sure you aren't violating any rules. Here are some usage examples :
You can check current usage with usagepolicycheck -t You can discover daily allowance with usagepolicycheck -l [--sites site1,sites2] You can check your usage on a whole week (here the first week of january as an example) using: usagepolicycheck -v --start '2019-01-01 10:00:15 +0100' --end '2019-01-15 10:00:15 +0100' on any frontends
Note that usagepolicycheck is automatically run on all frontends every week and reports usage policy violations to the offending users and Grid'5000 administrators.